Removing The Windshield Assembly; Installing The Windshield Assembly - Yamaha R1 Series 2015 Service Manual

EAS31643

REMOVING THE WINDSHIELD ASSEMBLY

1. Remove:
• Front side panel (left)
• Front side panel (right)
Refer to "GENERAL CHASSIS (2)" on page
4-7.
2. Remove:
• Windshield assembly
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Disconnect the turn signal light couplers "1".
1
b. Remove the rearview mirror nuts, and then
remove the rearview mirrors "2".
2
c. Remove the windshield assembly bolts "3".
d. Remove the windshield assembly "4".
TIP
Remove projections "a" on the windshield as-
sembly from grommets "b".
a
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS31644

INSTALLING THE WINDSHIELD ASSEMBLY

1
1. Install:
• Windshield assembly
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Install the windshield assembly "1".
TIP
• Insert projections "a" on the windshield assem-
bly into grommets "b".
• Insert projections "c" on the windshield assem-
bly into holes "d".
• Insert slots "e" in the windshield assembly into
projections "f" on the stay.
1
e
b. Install the windshield assembly bolts "2", and
then tighten the bolts to specification.
4-21
GENERAL CHASSIS (3)
3
b
4
e
b
a
c
a
3
f
f
b
d