Crank Position Sensor Removal; Crank Position Sensor Installation - Mercury 150 EFI Service Manual

IGNITION

Crank Position Sensor Removal

1. Disconnect sensor harness.
2. Remove screws securing sensor to engine.
a -

Crank Position Sensor Installation

1. Secure sensor to engine with 2 screws. Torque screws to 45 lb. in. (5 Nm).
2. Reconnect sensor harness.
Page 2A-38
a
b
Crank Position Sensor
58775
b - Harness Connector
90-883728 JULY 2001