Mercury 150 EFI Service Manual page 141

6. Remove planetary gear and clutch assembly from drive housing.
7. Remove solenoid arm, metal disc and plug from drive housing.
d
c
a -
b -
c -
8. Inspect drive housing needle bearing for roughness. If bearing is worn or damaged,
bearing can be removed by using an appropriate mandrel to drive/press bearing from
drive housing.
NOTE: If bearing has spun in drive housing bore, drive housing must be replaced.
a -
b -
90-883728 JULY 2001
e
Planetary Gear and
Clutch Assembly
Drive Housing
Plug
Needle Bearing
Drive Housing
CHARGING & STARTING SYSTEM
a
d - Metal Disc
e - Solenoid Arm
a
b
b
58437
58439
Page 2B-47