Mercury 150 EFI Service Manual page 113

Installation
1. Secure alternator to engine block with attaching bolts. Torque top bolt to 40 lb-ft (54
Nm). Torque bottom nut to 35 lb-ft (47.5 Nm).
2. Rotate belt tensioner and install alternator belt in groove of flywheel and alternator
pulley.
a -
3. Reconnect electrical harness to alternator.
a
b
a -
b -
c -
90-883728 JULY 2001
Belt Tensioner (Rotate Counterclockwise)
c
Top Bolt [Torque to 40 lb-ft (54 Nm)]
Bottom Nut [Torque to 35 lb-ft. (47.5 Nm)
Harnesses
CHARGING & STARTING SYSTEM
a
a
b
58771
58782
Page 2B-19