Service Replacement Certification Label; Removal; Date Code Identification; Installation - Mercury 150 EFI Service Manual

Service Replacement Certification Label

IMPORTANT: By federal law, it is required that all 1998 and newer Mercury Marine
outboards have a visible and legible emission certification label. If this label is mis-
sing or damaged, contact Mercury Marine Service for replacement if appropriate.

Removal

Remove all remaining pieces of the damaged or illegible label. Do not install new label
over the old label. Use a suitable solvent to remove any traces of the old label adhesive
from the display location.

Date Code Identification

Cut and remove a "V" notch through the month of engine manufacture before installing
the new label. The month of manufacture can be found on the old label. If the label is mis-
sing or the date code illegible, contact Mercury Marine Technical Service for assistance.
This engine conforms to 2002 Model Year
U.S. EPA regulations for marine SI engines.
Refer to Owners Manual
for required maintenance
Family: 2M9XM02.51C0
FEL: 139.00 GM/KW-HR
b
JAN FEB
a -
b -

Installation

Install the label on a clean surface in the original factory location.

Decal Location:

Model
2002 Merc/Mar 2.5 L V6 (150
H.P.)
2002 Merc/Mar 2.5 L V6 (175
H.P.)
2002 Merc/Mar 2.5 L V6 (200
H.P.)
90-883728 JULY 2001
Emission Control
Information
MAR APR MAY JUNE
a
"V" Notch
Month of Manufacture
Service Part No.
37-804669-02
37-804669-02
37-804669-02
2507
cc
PART # 37–804669-02
Idle Speed (in gear): 650 RPM
Timing: Idle – 0 – 9 ATDC
WOT – 20 BTDC
Spark Plug: NGK BPZ8HS-10
Gap: 0.040 in. (1.0 mm)
Valve Clearance (Cold) mm
Intake: N/A Exhaust: N/A
JULY AUG SEP
EMISSIONS
2002
175 HP
OCT NOV DEC
Location on Engine
Air Cover (Carb)
Vapor Separator
(EFI)
Vapor Separator
(EFI)
Air Cover (Carb)
Vapor Separator
(EFI)
Page 3D-7