Mercury 150 EFI Service Manual page 521

RIGHT HAND NON-RATCHETING
Speedometer Tube Installation
1. Route speedometer tube from gearcase around lower yoke and push into junction.
Junction should be secured to yoke with sta-strap.
2. Route speedometer tube from swivel tube around lower yoke and push into junction.
After insertion of speedometer tubes into junction, pull on each tube to verify that they
are locked into junction. If tube pulls out, reinsert into junction.
d
a -
b -
c -
d -
Page 6A-48
57736
Speedometer Tube from Gearcase
Junction
Sta-strap
Speedometer Tube from Swivel Tube
a
a
b
d
c
57735
90-883728 JULY 2001