Reassembly And Installation - Mercury 150 EFI Service Manual

9. Remove lower mount nuts.
a -
b -
10. Remove driveshaft housing from swivel bracket by pulling alternately from top to bot-
tom on housing.
11. Remove upper and lower mounts by lifting them out of driveshaft housing.

Reassembly and Installation

1. Apply a thin coat of 2-4-C with Teflon Marine Lubricant onto inside portion of exhaust
tube seal.
2. Install exhaust tube seal into driveshaft housing with tapered side of seal facing up.
a -
b -
90-883728 JULY 2001
a
a
Lower Mount Nuts
Lower Mount (1 each side)
Exhaust Tube Seal
Driveshaft Housing
CLAMP/SWIVEL BRACKETS & DRIVESHAFT HOUSING
b b
51855
b
b
a
a
51856
Page 5A-11