Table of Contents
Advertisement
CHARGING & STARTING SYSTEM
Installation
IMPORTANT: Clean flywheel/crankshaft taper with solvent and assemble dry.
1. Install flywheel.
2. Install flywheel washer and nut.
3. Hold flywheel with Flywheel Holder (91-52344). Torque nut to 125 lb-ft (169.5 Nm).
a -
Page 2B-8
a
Flywheel Holder (91-52344)
58776
90-883728 JULY 2001
Advertisement
Chapters
Table of Contents
Troubleshooting
