Mercury 150 EFI Service Manual page 130

CHARGING & STARTING SYSTEM
8. Place springs and brushes into brush holder and hold in place with brush retainer tool.
a -
b -
9. Install armature into starter frame and align match marks (a). Install commutator end
cap onto starter frame and align match marks (b). Remove brush retainer tool. Install
through bolts (c) and torque to 70 lb. in. (8.0 N·m).
a -
b -
c -
Page 2B-36
a
Bushing Retainer Tool
Bushing (do not over lubricate)
c
a
b
Alignment Marks
Alignment Marks
Bolts [Torque to 70 lb. in. (8 N m)]
b
c
11661
11648
90-883728 JULY 2001