LNS QUICK LOAD SERVO III MI Instruction Manual page 73

CHAPTER 6: GENERAL DESCRIPTION
7.2. Layout of the elements
SQ12 C
D
B
Designation
A
B
C
D
E
F
SQ12
7.3. Use of the retraction
Mounted onto four extremely rigid bearings (B), the bar feed system slides on two cylindrical rails (A) that
keep it aligned when it is in operational position. In this position, the bar feed system is fastened by two
solid hooks (C).
A safety switch (SQ12) impedes any handling as long as the bar feed system is not in operational
position.
•
To move the bar feed system, unlock the hooks by lifting the latching handles (D). An autolock
device (F) will prevent the bar feed system to move back.
•
To bring the bar feed in operational position, lift the auto lock device.
A
Description
Guiding rails
Sliding bearings
Latches
Latch handle
Bracket (for lateral or longitudinal retraction)
Auto lock device (not shown here)
Retraction system in position switch
E
QUICK LOAD SERVO III MI
6-15