Electrical Connections; Pneumatical Connections - LNS QUICK LOAD SERVO III MI Instruction Manual

CHAPTER 3: SETTING INTO OPERATION
2.7. Security analysis for the correct incorporation
Before considering assembling the machine, it is necessary to consider the following points:
•
Consider security strategies that reduce risks to an acceptable level;
•
Define the tasks required for applications to predict and assess the need of access and / or for
the approach;
•
Identify sources of risks, including failures and failure modes associated with each task. Risks
can come from:
machine in which the device QLS III is integrated;
o
its association with other equipment,
o
People's interaction with the machine.
o
•
Evaluate and assess the risks associated by using the machine QLS III MI:
programming risks
o
operation risks
o
risks of use
o
maintenance risks
o
•
Choose methods of protection :
the use of protective devices
o
the introduction of signals
o
compliance with safe work procedures
o
3.

ELECTRICAL CONNECTIONS

See CHAPTER 4: ELECTRICS, section 4. INTERFACE.
4.

PNEUMATICAL CONNECTIONS

See CHAPTER 5: PNEUMATICS, section 2. AIR FILTERING UNIT.
QUICK LOAD SERVO III MI
3-15