Powering Up - LNS QUICK LOAD SERVO III MI Instruction Manual

7-2
1.

POWERING UP

Please read the safety instructions provided at the beginning of this manual before
handling the following devices.
The motor of the QUICK LOAD SERVO III MI bar feed system is equipped with a built-in absolute
encoder that continuously controls the position of the pusher.
When the bar feed system is powered down or there is a power failure, this position is kept in the memory
by the PLC.
When powering up, the value saved is immediately taken into account, thus avoiding any input from the
beginning. The status parameters saved in the PLC prior to powering down are then checked by the PLC
which analyses them. The latter then gives the operator access only to those handling operations, which
should be undertaken.
To power up the bar feed system, turn (1) the switch handle to
the right, to the Ion position.
To power down, turn the switch to the left, to the 0off position.
The main switch can be locked with a padlock. This way, it is
impossible to turn the bar feed system on.
Push (2) the locking mechanism and insert (3) the padlock into
the opening. Lock the padlock.
QUICK LOAD SERVO III MI
CHAPTER 7: OPERATION
1
I
O n
3
2