Appendix
9.2 Blade Specification
For cutting thick fluorescent and reflective vinyl. Also for cutting detailed
work in standard vinyl.
The blade is 45° with Red Cap(5-unit package), 0.25 mm offset
For cutting reflective vinyl, cardboard, sandblast, flock, and stencil sharp
edge.
The blade is 60° with Green Cap, 0.50 mm blade offset
For cutting thin sandblast mask and stencil with friction feed or sprocket
feed machine.
The blade is 60° with Blue Cap, 0.25 mm blade offset
For Cutting small text and fine detail. Sharp blade with smallest offset.
The blade is 42° with Black Cap, 0.175 mm blade offset
For thin and delicate media such as window tint
The blade is 25° with Yellow Cap(5-unit package), 0.25 mm blade offset
92
ValueCut USER MANUAL
V5a 2015 Jan