Festo CPA VI Series Manual page 92

5. Maintenance and conversion
1 Hat rail
2 Clamping
element of the
hat rail clamping
unit
3 Locking screw of
the hat rail
clamping unit
Fig. 5/1: Dismantling the CPA valve terminal
5-8
Loosening the CPA valve terminal fitted onto a hat
rail
1. Loosen the locking screw of the hat rail clamping unit on
the left and right-hand end plates (see diagram). Make
sure that the clamping element lies horizontally to the hat
rail.
2. Swing the CPA valve terminal forwards from the hat rail
(see diagram, arrow A).
3. Lift the CPA valve terminal off the hat rail (see diagram,
arrow B).
1
A
B
2
3
Festo P.BE-CPA-EN en 0207c