Festo CPA VI Series Manual page 16

Contents and general instructions
Term Meaning
CPA valve terminal with
multipin connection
(MP connection)
CPX modules
CPX terminal
Electrical bridge
Electrical sub-base
End plate
I/O
Manifold block
Manual override
Pin-type
Pneumatic interface
Pneumatic sub-base
Sub-base
Valve sub-base
Tab. 0/5: Product-specific terms and abbreviations
XIV
CPA valve terminal variant with sub-D plug via which all valve solenoid
coils are centrally connected.
Common term for the various modules which can be incorporated in a
CPX terminal
Modular electric terminal type 50
Conducts the power supply from the manifold block to the solenoid coils
on CPA valve terminals with MP, CP or AS-Interface connection.
Block with multipin, CP or AS-Interface connection
Outer left and right-hand end plates of the CPA valve terminal for supply-
ing the valves with compressed air and for conducting the exhaust air, as
well as for connecting silencers.
Input/output modules
Block for the electrical linking of the valve solenoid coils with the
electrical sub-base or the CPX pneumatic interface.
Manual override
Plug connection (with/without inner thread) for connecting the supply
cables to the CPA valve terminal
The pneumatic interface is the interface between the modular electrical
periphery of the CPX terminal and the CPA pneumatics.
Pneumatic manifold sub-base for the valve sub-bases, with work
connections 2 and 4 and open or closed compressed air channel 1.
Pneumatic manifold sub-base with open or closed compressed air
channel for single-solenoid, double-solenoid or mid-position valves with
work connections 2 and 4.
Plate with single-solenoid, double-solenoid or mid-position valve.
Festo P.BE-CPA-EN en 0207c