Festo CPA VI Series Manual page 113

5. Maintenance and conversion
Number Starting basis: valve terminals with
)
* an even number of valve locations
- 1 2 basis tie rods and
2 long tie rod screws
- 2 2 basis tie rods
- 3 2 basis tie rods and
2 long tie rod screws
> - 3 2 basis tie rods if necessary
2 long tie rod screws
)
* Number of valve locations to be removed
Tab. 5/8: Adapting the tie rod length
Festo P.BE-CPA-EN en 0207c
The table below lists the tie rod components which you will
require for adapting the tie rod length.
Starting basis: valve terminals with
an odd number of valve locations
2 short tie rod screws
2 basis tie rods
2 basis tie rods
2 short tie rod screws
2 basis tie rods if necessary
2 short tie rod screws
5-29