Festo CPA VI Series Manual page 126

A. Technical appendix
Electric CPA valve terminal with IC, MP or CP connection
Electromagnetic compatibility (EMC)
CPA valve terminal with CP connection
– Interference emitted
– Resistance to interference
Protection against electric shock
(protection against direct and indirect contact
as per EN 60204-1/IEC 204)
Operating voltage
– Operating voltage range
– Residual ripple
Current consumption per valve solenoid coil
Rated current in high current phase
(I as per VDE 0580)
20
Rated current in holding current phase
Power consumption
Input current consumption of electronics
– CPA valve terminal with CP connection
Tab. A/7: Technical specifications electric components
A-10
Tested as per EN 55011, limit class A
Tested as per EN 50082-2
With a PELV power unit
(Protected Extra Low Voltage)
24 V DC
20.4...26.4 V
4 Vpp
Approx. 35 mA
Approx. 15 mA
Max. 1 W
20 mA
Data on the electric components of the CPA valve terminal
with MP or AS-Interface connection are enclosed with the
product.
Festo P.BE-CPA-EN en 0207c