Festo CPA VI Series Manual page 110

5. Maintenance and conversion
1
1 Basis tie rods for 6 valve locations
2 Tie rod extension for 2 valve locations
3
Two new valve locations (7th. and 8th. valve locations)
4 Further new valve location (9th. valve location)
5 Short tie rod screw for extending this CPA valve terminal to 8 valve locations
6 Long tie rod screw for extending this CPA valve terminal to 9 valve locations
Fig. 5/13: Extending the CPA valve terminal
5-26
The diagram below shows as an example the extension of a
CPA valve terminal with 6 valve locations to 8 or 9 valve
locations.
2
5
3 4
Festo P.BE-CPA-EN en 0207c
6