Festo CPA VI Series Manual page 137

B. Supplementary component summary and installation instructions
Festo P.BE-CPA-EN en 0207c
Fig. B/9: Fitting the dowel pins
5. Insert the fastening screws in the appropriate holes and
tighten them with 2 Nm.
6. Fasten the CPX terminal onto its mounting surface (see
CPX system manual).
7. Carry out the electrical and pneumatic connections of the
CPX terminal. Information on the:
– electrics can be found in the CPX system manual.
– pneumatics can be found in chapter 3 of this manual.
B-11