Festo CPA VI Series Manual page 12

Contents and general instructions
1 Valve sub-bases
2 Connection
sub-bases
3 End plates
Fig. 0/1: Main components of the CPA valve terminal
X
The CPA valve terminal consists of the following pneumatic
and electrical components: The most important pneumatic
components are the valve sub-bases, connection sub-bases
and end plates (see diagram).
1
3
This manual contains the documentation for the valve sub-
bases with Ident. codes B, E, G, H, J, K, M and N (see chapter
"System overview, description of components").
2 3
Festo P.BE-CPA-EN en 0207c