Festo CPA VI Series Manual page 22

1. System summary
CPA valve terminal
with MP connection
CPA valve terminal
with CP connection
CPA valve terminal
with AS-Interface
connection
Sizes of the CPA valve
terminal
1-6
This CPA valve terminal is available with 2 to max. 22 single-
coil valve locations or up to max. 11 double-coil valve loca-
tions. Maximum 22 valve coils can be actuated. The electri-
cal connection of the valve solenoid coils is made centrally
via the multipin plug.
This CPA valve terminal is available with 2 to max. 16 single-
coil valve locations or up to max. 8 double-coil valve loca-
tions. Maximum 16 valve coils can be actuated. The connec-
tion to the higher-order field bus node is made via special
ready-to-use CP cables.
This CPA valve terminal is connected to the AS-Interface bus
via special AS-Interface cables. It is available with two types
of electrical connections:
– with additional power supply connection (load voltage
can be switched off separately).
– without additional power supply connection.
Both variants are available with 2 to max. 4 single-coil valve
locations or up to max. 2 double-coil valve locations. Maxi-
mum 4 valve coils can be actuated.
All CPA valve terminal variants are available with micro
valves (valve width 10 mm, CPA10) or with mini valves (valve
width 14 mm, CPA14). Mixed operation with valves of both
sizes in not possible on a CPA valve terminal.
Festo P.BE-CPA-EN en 0207c