Festo CPA VI Series Manual page 122

A. Technical appendix
Pneumatics
Medium
Design
Pressure range
– With auxiliary pilot branched internally
from 1 (internal pilot air)
– With externally supplied auxiliary pilot
air (external pilot air)
Manual override
Tab. A/4: Technical specifications – medium and pressure ranges
A-6
Caution
– If possible, operate the CPA valve terminal with non-
lubricated auxiliary pilot air (connections 12/14).
Otherwise observe the instructions in the section
"Preparing the compressed air."
– With CPA valve terminals with internally branched
auxiliary pilot air, the above mentioned instruction also
applies to the supply air (connection 1).
Type CPA10/14
Compressed air, filtered (<40 µm), lubricated
(oil: VG 32) or non-lubricated/vacuum
Valve sub-bases with spool valves
Valve sub-base Ident. code J:
1; 12/14: 2...8 bar
Valve location Ident. codes M, N, K, H, B, G, E):
1; 12/14: 3...8 bar
Valve location Ident. codes B, E, G, J, M:
12/14: 3...8 bar
Valve location Ident. codes N, K, H:
12/14: see diagrams
Valve location Ident. codes B, E, G, J, M:
1: - 0,9...10 bar
All valve sub-bases:
1: 3...10 bar
Locking or non-locking
Festo P.BE-CPA-EN en 0207c