Safety And Requirements For Product Use; Technical Data; Ordered Strokes [Mm] - Festo YXC Series Description, Mechanical Installation

1

Safety and requirements for product use

1 Safety and requirements for product use
1.1

Technical data

Note
The technical data are contained in a separate data sheet, depending on the order.
Damage to the product from incorrect use and non-compliance with the technical data.
The separate data sheet as well as the CAD model are components of the product docu­
mentation and must be downloaded as follows.
• Determine order ID of the handling system (è Product labelling on the Y-module).
• Download data sheet and CAD model from the Festo Support Portal by specifying
the order ID (è www.festo.com/sp).
• Print out data sheet and keep it together with this description.
• Dimensions and other required measurements should be derived from the CAD model.
1.1.1

Ordered strokes [mm]

For single-axis system and linear gantry:
• Determine stroke in Y-direction (Hy) (è Product labelling on the Y-module):
– Hy = stroke in Y-direction e.g.: EHMY-LP-EGC-120-TB-KF-1000-...
For planar surface gantry and three-dimensional gantry:
• Determine width in Y-direction (By) and stroke in X-direction (Hy) (è Product labelling on the
X-module):
– By = width in Y-direction
– Hx = stroke in X-direction e.g.: EHMX-EGC-120-TB-KF-1200-642-...
6
e.g.: EHMX-EGC-120-TB-KF-1200-642-...
Festo – GDCP-YXC-EN – 1502NH – English