Table of Contents
Advertisement
5
Installation of the planar surface gantries and the three-dimensional gantries
3. Tighten screws on the underside.
Screw size and tightening
torque
[Nm]
4. Place washers under screws.
5. Place screws in the centre of the elongated
hole.
6. Lightly clamp the adjusting plate to the
mounting surface with the screws.
7. Use spanner with t 5 mm.
If t 5 mm, the maximum height compensator is
smaller by the difference (t − 5) mm.
Festo – GDCP-YXC-EN – 1502NH – English
EHMX-EGC-
50
80
M3x16
M5x25
1.2
5.9
120
185
M6x30
M6x30
9.9
9.9
49
Advertisement
Table of Contents
