Table of Contents
Advertisement
1
Safety and requirements for product use
1.5.1
Obligations of the operating company
The product is an incomplete machine.
Commissioning is prohibited until it has been established that the machinery in which it will be installed
is in compliance with the provisions of the Machinery Directive 2006/42/EC.
1.5.2
Qualified specialized personnel
Installation, mounting, commissioning, maintenance, repair and de-commissioning should only be per
formed by qualified personnel who are familiar with:
– installation and operation of electrical control systems
– installation and operation of pneumatic systems
– mounting and operation of mechatronic handling systems
– the applicable regulations for accident prevention and occupational safety
– the documentation and mode of operation of the product.
1.5.3
Range of application and certifications
Standards and test values that the product complies with and fulfills (è 1.1 Technical data).
Festo – GDCP-YXC-EN – 1502NH – English
9
Advertisement
Table of Contents
