Table of Contents
Advertisement
10
Maintenance and care
10
Maintenance and care
10.1
Safety instructions
Note
Maintenance and care may only be performed by qualified specialized personnel who
are familiar with:
– installation and operation of electrical control systems
– installation and operation of pneumatic systems
– installation and operation of handling systems
– the documentation for the product.
For support:
• Contact your regional Festo contact person.
Additional information è www.festo.com.
Note
The power supply is not switched off.
Damage to the product from incorrect handling.
• Never pull the plug connectors and electrical interfaces when powered.
• Never connect the plug connectors and electrical interfaces when powered.
• Observe the handling specifications for electrostatically sensitive devices.
Danger
Injury (death) due to electric shock.
• Switch off all supply lines prior to mounting, installation and/or maintenance work
and secure them from being switched back on.
• After the supply voltage is switched off:
Start work on plug connectors and interfaces only when the residual voltage has
fallen to a harmless level (è Documentation of the controller used).
• Switch the power supply back on only after completion of work.
Warning
Moving parts are not secured. Components are installed vertically or diagonally. Moving
parts run uncontrollably into the lower end position from their own dead weight.
Injury due to impact or pinching. Damage to the product.
Before mounting and before the power supply is switched off:
• Bring vertically or diagonally moving parts into the lower end position in a controlled
manner.
• Secure vertically or diagonally moving parts.
86
Festo – GDCP-YXC-EN – 1502NH – English
Advertisement
Table of Contents
