Table of Contents
Advertisement
9
Operation
9
Operation
The following applies for operation of a system into which this handling system is integrated.
9.1
Safety instructions
• Observe additional safety instructions in the following chapters:
– è 1 Safety and requirements for product use
– è 2 Conveying and storage
– è 8 Commissioning
9.2
Characteristic curve of the connecting shaft
• The permitted limit speed depends on the order (è 1.1 Technical data).
If the conditions in real operation change:
• Take into account the limit speed of the connecting shaft (KSK).
Maximum permitted speed n dependent on the length L1.
Festo – GDCP-YXC-EN – 1502NH – English
KSK-50
KSK-70
KSK-80
KSK-120
KSK-185
85
Advertisement
Table of Contents
