Festo YXC Series Description, Mechanical Installation page 64

5 Installation of the planar surface gantries and the three-dimensional gantries
For motor position in the middle
Otherwise with point 6. (è Page 65).
Caution
Unfastened motor in the middle turns with the connecting shaft.
Injury due to impacts or pinching. Damage to the product.
• Place motor outside the movement range.
• Fasten motor sufficiently (è 5.1.3 Preparation of the mounting surface).
If feather keys are pressed into the drive shaft of the gear unit:
1. Remove feather keys.
2. Place motor outside the movement range.
3. Push couplings as far as possible onto the
drive shafts.
4. Tighten the screws lightly.
Check: The couplings are fixed on both sides.
64 Festo – GDCP-YXC-EN – 1502NH – English