Festo YXC Series Description, Mechanical Installation page 59

5 Installation of the planar surface gantries and the three-dimensional gantries
Note
Incorrect mounting can cause material damage and malfunction.
Collision with Y-module or Z-module if the connecting shaft is mounted to the wrong
side.
• Mount connecting shaft only to the drive side (è 5.3.1 Installation YXCF/YXCR).
Couplings slide if the contact surfaces are not dry and free of grease.
• Clean contact surfaces on the following components:
– Connecting tube
– Couplings
– Drive shafts (leave expanding mandrel cone greased on the inside).
– Hollow shafts on the X-axes
– Drive shafts on the gear unit
Check connecting tube and couplings for
1.
excellent condition.
Check: no kinks, dents, deflections.
Insert a screwdriver into the cut-out.
2.
Lift off covers at the hollow shafts.
3.
Festo – GDCP-YXC-EN – 1502NH – English 59