Table of Contents
Advertisement
1
Safety and requirements for product use
1.4
Permitted mounting position
Use product only in the following mounting positions:
Handling system
Single-axis system
Linear gantry
Planar surface gantry
Three-dimensional gantry
Related illustrations (è 3.2 Module types).
1)
Note
Deviating mounting positions or overhead mounting are not permitted. Energy chains
sag due to gravity. Cables and hoses are overloaded.
• Use product only in a permitted mounting position.
1.5
Requirements for product use
• Provide this documentation to the following persons:
– design engineer
– installer
– commissioner of the machine or system
• Comply with the specifications of the documentation. Follow all accompanying documentation and
the documentation of any associated accessories.
• Take the following into consideration for the destination:
– applicable legal regulations
– regulations and standards
– regulations of the testing organisations and insurers
– national specifications
• For correct and safe use, take the following into account:
– all warnings and notes
– all load limits of the product and the connected components (è 1.1 Technical data)
8
1)
Mounting position
X-module
–
–
Horizontal
Horizontal
Y-module
Horizontal
Horizontal
Horizontal
Horizontal
Festo – GDCP-YXC-EN – 1502NH – English
Z-module
–
Vertical
–
Vertical
Advertisement
Table of Contents
