4
Installation of the single-axis systems and the linear gantries
1
1
Y-module
2
Mounting kit
Note
In order to move the mounting kit, the screws 3 on the support profile of the energy
chain must be accessible from the reverse side after mounting.
Mount Y-module to a machine frame correspondingly.
On the reverse side:
1. Unscrew screws on the support profile of
the energy chain.
Festo – GDCP-YXC-EN – 1502NH – English
The mounting kits are pre-mounted to the
Y-module.
Check number n and support spacing Y2.
Place Y-module.
3
Screw
3
2
33