5
Installation of the planar surface gantries and the three-dimensional gantries
If the expanding mandrel cone is stuck, mounting is not possible. The drive shaft has a
forcing thread G
Turn screw into the thread G1.
Push out expanding mandrel cone.
Thread size
G1
7. Unscrew the screws.
8. Lift off half-shell.
9. Push couplings as far as possible onto the
drive shafts.
Festo – GDCP-YXC-EN – 1502NH – English
.
1
EHMX-EGC-
50
80
M4
M6
120
185
M10
M12
61