Remove The Cover Cap For Manual Override (Optional); Commissioning Of The Electrical Components; Safe Output Module Cpx-Fvda-P2; Parameterisation - Festo VTSA-F-CB Manual

Commissioning
Fig. 54 Mounting the cover cap for MO, non-detenting/robust
Prerequisite: the MO is in normal position.
• Align the cover cap and clip the snap hooks into the recesses of the MO.
Ä The cover cap is mounted.
9.1.2.2

Remove the cover cap for manual override (optional).

It takes additional force to remove the cover caps. The snap hooks of the cover caps can be damaged
during disassembly.
• Use a suitable screwdriver to lever the cover cap for the MO off the MO.
9.2

Commissioning of the Electrical Components

9.2.1

Safe output module CPX-FVDA-P2

Commissioning è Description CPX-FVDA-P2.
9.3

Parameterisation

9.3.1

Process Data

Process Data of the Soft Start Valves
The process data belong to the following type codes:
– VABF-S6-1-P5A4S2YE-G12-1T5-PA
– VABF-S6-1-P5A4S1YE-G12-1T5-PA
– VABF-S6-1-P5A4S2S-G12-1T5-PA
– VABF-S6-1-P5A4S1S-G12-1T5-PA
Festo — VTSA-F-CB — 2020-01
1 Cover cap for MO non-detenting/robust
73