Rs-232 Commands - Elan S128P Installation Manual

E L A N H O M E S Y S T E M S

RS-232 Commands

The following list contains the RS-232 commands for the S128P. These commands are included in the IR Library of
the latest versions of VIA!TOOLS or ELANTOOLS. Please refer to the VIA!TOOLS or ELANTOOLS Help file for spe-
cific information about these commands and how to use them.
There are three types of commands:
• System Commands
• Video Commands
• External IR Commands
System Commands
BAS (Bass)
Description:
• Sets Zone zz to bass xyz.
• Increment Zone zz bass.
• Decrement Zone zz bass.
• Has no effect if zone is off.
• If sending 00, the + or - can be omitted.
Command:
&S12,BAS,zz,a<cr>
&S12,BAS,zz,xyz<cr>
Query:
&S12,BAS,zz?<cr>
Reply:
&S12,BAS,zz,xyz<cr>
Parameters:
<cr>: carriage return: Hexadecimal 0x0D or Decimal 13
zz: Zone: 01-32
a: + = Increments (plus symbol)
- = Decrements (minus symbol)
x: + Sets to positive number (plus symbol)
- Sets to negative number (minus symbol)
yz: 00 - 18
00 = Flat
Examples:
• &S12,BAS,+13,+<cr> Increments Zone 13's bass.
• &S12,BAS,02?<cr> queries Zone 2 for its bass.
• &S12,BAS,13,-03<cr> sets Zone 13's bass to -3.
• &S12,BAS,13,00<cr> Zone 13 bass is flat
© ELAN Home Systems 2009 • All rights reserved.
S128P.indd 91
S128P
INSTALLATION MANUAL
Page 91
1/15/2009 1:07:43 PM