Connections When Using An Elan Spp Precision Panel-Front; Via!Net Connection; Ext Ir Connections; Sense Input Connections - Elan S128P Installation Manual

S128P
E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
Connections When Using an ELAN
SPP System Precision Panel - Front

VIA!NET Connection

This RJ-45 connector is used for configuring multiple SS1 configurations. See the VIA!TOOLS or ELANTOOLS Help
file for additionl information about configuring multiple SS1's.
Figure 3-19: VIA!NET Connection (Future Use)

EXT IR Connections

The External IR Input is a powerful feature that can enable specialized functionality in situations where system-wide
(not zone-specific) IR control is required. Connect a 3.5mm mono interconnect cable between EXT IR of the SPP
and EXT IR IN of the S128P.
Figure 3-20: EXT IR Connection (Not Used)

Sense Input Connections

Information from ELAN™SENSE Sensors connected to the S128P's ELAN SENSE INPUTS is used to trigger events
that have been programmed into VIA! Touch Panels. Typically, sensors will connect to the back of the SPP Precision
Panel, then 3.5mm stereo interconnect cables will be used between the Precision Panel's TO SENSE INPUTS jacks
and the S128P Controller's ELAN SENSE INPUTS jacks. Utilize VIA!TOOLS or ELANTOOLS Setup Software to create
IR or serial command strings for automated functions. See the VIA!TOOLS or ELANTOOLS Help file for additional
information about programming Sense Inputs.
S128P
Figure 3-21: Sense Input Connections
© ELAN Home Systems 2009 • All rights reserved. Page 39
S128P.indd 39 1/15/2009 1:07:11 PM