Ss/Sc4 Connection; Zone 1-8 Connections - Elan S128P Installation Manual

S128P
INSTALLATION MANUAL

SS/SC4 Connection

Use the SS/SC4 RJ-45 connector to integrate an ELAN SS1 System Station or SC-4 System Controller to the S128P
Multi-Room Controller in order to facilitate integration of RS-232 controlled systems such as security, lighting or
HVAC. Use an RJ-45 Interconnect Cable for this purpose.

ZONE 1-8 Connections

Connect a straight-through RJ-45 interconnect cable (RJ-45 1 or 2 meter Interconnect Cable) between the S128P's
1-8 Zone Inputs and the SPP Zone 1-8 RJ-45 jacks. This routes all keypads, touch panels, touchpads and IR receiv-
ers punched-down on the back of the SPP directly to the S128P.
NOTE: In order to facilitate RS-485 communication, Zone 1 must
ALWAYS be connected between the S128P Controller and the
SPP Precision Panel.
SPP to S128P Zone Keypad Connections
SPP
Page 40
S128P.indd 40
Figure 3-22: SS/SC4
S128P
ZONE
1
Figure 3-23: Zone Keypad Input Connections
E L A N H O M E S Y S T E M S
(Zone 1 shown)
© ELAN Home Systems 2009 • All rights reserved.
1/15/2009 1:07:12 PM