Advanced Video Switching-Component Video; V85 Component Video Controller - Elan S128P Installation Manual

E L A N H O M E S Y S T E M S

Advanced Video Switching-Component Video

V85 Component Video Controller

Use an ELAN V85 (or multiple V85s) to switch component video. Up to 8 sources can be switched to up to 32 loca-
tions using multiple V85s. Connect RCA audio patch cables from a source to the S128P's Source Audio Inputs.
Connect component video cables from the source to the V85's Component Video Inputs. Control using IR (see All IR
Out Port Connections) or RS-232 (see RS-232 Connections) is possible.
NOTE: The S128P is used to switch composite video only in this application. Use ELAN's V85 Component
Video Controller to switch component video.
NOTE: The V85 also has CAT5 Zone Out connections that are compatible with CVWP Receive Wall Plates
and allow component video to be sent over CAT5 cables.
V85
© ELAN Home Systems 2009 • All rights reserved.
S128P.indd 67
S128P
Figure 3-60: V85 Advanced Video Switching Connectiions
S128P
Composite
INSTALLATION MANUAL
Page 67
1/15/2009 1:07:36 PM