C2 Communications Controller Connections - Elan S128P Installation Manual

S128P
INSTALLATION MANUAL
C2 Connections
The diagram below shows the necessary connections when installing a C2 and an S128P without using a SPP
Precision Panel. Use SUM if you want music to mute and the page/doorbell audio to be heard over the house
speakers. SUM is used to trigger the page/doorbell input of an ELAN S128P. Required connections include:
• SUM Trigger Output from C2 to Page IN of S128P
• PG & DB OUT from C2 to PAGE IN of S128P
• MOH OUT from S128P to MOH IN of C2
• PAGE OUT from S128P #1 to PAGE IN of S128P #2 etc.
(for multi-chassis systems - see System Expansion)
PAGE/SUM DB1&DB2
TRIGGER OUTPUTS
(SUM requires 3.5mm
mono, PAGE, DB1,
& DB2 require 3.5mm
stereo only)
C2 to S128P Audio Connections
Using a stereo RCA interconnect cable, connect C2 PAGE & DB OUT to the S128P's PAGE IN, and one of the
S128P's MONO MOH OUT jacks to the MOH IN of the C2.
C2 to S128P Page/Doorbell/Music-On-Hold Connections
C2
PG/DB OUT
MOH IN
(MONO)
Page 48
S128P.indd 48
(no SPP Precision Panel)
C2 to S128P Connections
COM2
SUM PG
DB 1 DB 2
OUTPUTS
S128P
3.5mm Stereo
interconnect
cable
Figure 3-33: C2 to S128P Connectivity
RCA Cable
Figure 3-34: C2 to S128P Audio Connections
PG/DB OUT
TRIGGERS
1 2
+ - + -
MOH IN
INPUTS
(MONO)
Stereo
RCA Cable
Stereo
© ELAN Home Systems 2009 • All rights reserved.
E L A N H O M E S Y S T E M S
PAGE DOOR
CHIME OUTPUT
(RCA-Type Mono)
MUSIC-ON-HOLD
INPUT JACK
(MONO)
S128P
1/15/2009 1:07:19 PM