Audio/Video Connections; Loop Output Connections - Elan S128P Installation Manual

E L A N H O M E S Y S T E M S
Audio Connections
There are 12 Audio Source Inputs and 12 Audio Source Loop Outputs on the S128P. Each system source will be
connected to a specific Source Input, allowing audio distribution to any zone of the S128P. Each Source Input cor-
responds to the same numbered IR Output port.
Source Input Connections
Connect the Left/Right audio output of each source to the Left/Right Source Input using stereo RCA audio cables.
Make sure to maintain Left/Right channel connections.
Audio Source Connections
DVD PLAYER
VIDEO AUDIO OUT
OUT
L
S128P

Loop Output Connections

Ideal for sharing sources with Home Theaters, these buffered Loop Outputs pass line-level audio directly out of the
corresponding Source Input. This audio is buffered, therefore no signal loss will occur. Use RCA audio cables to
connect a Loop Output to a Home Theater receiver or an additional S128P chassis.
© ELAN Home Systems 2009 • All rights reserved.
S128P.indd 51
(Sources 1-3 Shown)
TUNER SATELLITE RECEIVER
AUDIO OUT
AUDIO OUT
R L R L
Figure 3-39: Source Input Connections
Audio Loop Connections
Source 1 Shown
DVD PLAYER TUNER SATELLITE RECEIVER
VIDEO AUDIO OUT AUDIO OUT
OUT
L R
L R
S128P
A/V Receiver
Audio Input
Figure 3-40: Loop Output Connections
VIDEO
OUT
R
AUDIO OUT VIDEO
OUT
L R
S128P
INSTALLATION MANUAL
Page 51
1/15/2009 1:07:22 PM