Elan S128P Installation Manual page 95

E L A N H O M E S Y S T E M S
DRC (Dynamic Range Compression)
Description:
• Turns specified Zone zz's DRC off/on/toggle.
• Has no effect if the zone is off.
Command:
&S12,DRC,zz,a<cr>
Query:
&S12,DRC,zz?<cr>
Reply:
&S12,DRC,zz,a<cr>
Parameters:
<cr>: carriage return: Hexadecimal 0x0D or Decimal 13
zz: Zone: 01-32
a: 0 = OFF
1 = ON
2 = TOG
Examples:
• &S12,DRC,13,0<cr> turns Zone 13's DRC off.
• &S12,DRC,02?<cr> queries Zone 2's DRC.
• &S12,DRC,13,1<cr> turns Zone 13's DRC on.
• &S12,DRC,13,2<cr> toggles Zone 13's DRC from on to off or off to on.
DB
Description:
• Turns specified DB off/on/toggle. This will initiate a DB that will route audio present at the S128P's Page In audio
jack to zones that have DB enabled.
• Works if the System/Zone is on or off.
• Only chassis one will respond.
Command:
&S12,DB,a<cr>
Query:
&S12,DB?<cr>
Reply:
&S12,DB,a<cr>
Parameters:
<cr>: carriage return: Hexadecimal 0x0D or Decimal 13
a: 0 = OFF
1 = ON
2 = Toggle
Examples:
• &S12,DB,0<cr> turns Doorbell off.
• &S12,DB?<cr> queries Doorbell status.
• &S12,DB,2<cr> toggles Doorbell from on to off or off to on.
© ELAN Home Systems 2009 • All rights reserved.
S128P.indd 93
S128P
INSTALLATION MANUAL
Page 93
1/15/2009 1:07:43 PM