S128P Connections When Not Using An Elan Spp Precision Panel; Sense Input Connections - Elan S128P Installation Manual

S128P
E L A N H O M E S Y S T E M S
INSTALLATION MANUAL
S128P Connections When NOT Using a
System Precision Panel
Sense Trigger Input Connections
Information from ELAN™SENSE Sensors connected to the S128P's Sense Trigger Inputs is used to trigger events
that have been programmed into VIA! Touch panels. To connect ELANSense sensors directly to the S128P, sim-
ply plug the 3.5 mm stereo interconnect cable of the Sensor into the desired Sense Trigger Input. If long runs
are required, the 3.5 mm stereo interconnect cable must be cut off and the cable extended using Cat-5. Utilize
VIA!TOOLS or ELANTOOLS setup software to create IR or serial command strings for automated functions. See
VIA!TOOLS or ELANTOOLS Help for additional information about programming Sense Triggers.
ELAN™SENSE Sensor to S128P Sense Trigger Inputs
S128P
AUDIO SENSOR
Figure 3-26: Sense Trigger Input Connections
© ELAN Home Systems 2009 • All rights reserved. Page 43
S128P.indd 43 1/15/2009 1:07:14 PM