Elan S128P Installation Manual page 100

S128P
INSTALLATION MANUAL
Parameters:
<cr>: carriage return: Hexadecimal 0x0D or Decimal 13
zz: Zone: 01-32
a: 0 = OFF
1 = ON
2 = TOG
Examples:
• &S12,MUT,13,0<cr> turns Zone 13's Mute off.
• &S12,MUT,02?<cr> queries Zone 2's Mute.
• &S12,MUT,13,1<cr> turns Zone 13's Mute on.
• &S12,MUT,13,2<cr> toggles Zone 13's Mute from on to off or off to on.
PG
Description:
• Turns specified PG off/on/toggle. This will initiate a PG that will route audio present at the S128P's Page In audio
jack to zones that have PG enabled.
• Works if the System/Zone is on or off.
• Only Chassis 1 will respond.
Command:
&S12,PG,a<cr>
Query:
&S12,PG?<cr>
Reply:
&S12,PG,a<cr>
Parameters:
<cr>: carriage return: Hexadecimal 0x0D or Decimal 13
a: 0 = OFF
1 = ON
2 = Toggle
Examples:
• &S12,PG,1<cr> turns Page on.
• &S12,PG?<cr> queries Page status.
• &S12,PG,2<cr> toggles Page from on to off or off to on.
PWR (Power
)
Description:
• Turns specified Zone zz off/on/toggle.
• Zone turns on to last selected source.
Command:
&S12,PWR,zz,a<cr>
Query:
&S12,PWR,zz?<cr>
Page 98
S128P.indd 98
E L A N H O M E S Y S T E M S
© ELAN Home Systems 2009 • All rights reserved.
1/15/2009 1:07:44 PM