Elan S128P Installation Manual page 104

S128P
INSTALLATION MANUAL E L A N H O M E S Y S T E M S
a:
0 = OFF
1 = ON
2 = TOG
Examples:
• &S12,WHM,13,0<cr> turns Zone 13's WHM off.
• &S12,WHM,02?<cr> queries Zone 2's WHM.
• &S12,WHM,13,1<cr> turns Zone 13's WHM on.
• &S12,WHM,13,2<cr> toggles Zone 13's WHM from on to off or off to on.
Video Commands COR (Component Routing)
Description:
• Routes Unit u's Component Input Group i to
Component Output Group o.
• Used in 16x16 mode.
• Works if S128P is off or on.
Command:
&S12,COR,uoi<cr>
Query:
N/A
Reply:
N/A
Parameters:
<cr>: carriage return: Hexadecimal 0x0D or Decimal 13
u: Unit 1-4
o: Output A-E
i: Input A-E
Examples:
• &S12,COR,1,AE<cr> routes Unit 1 Component Input A to Component Output E.
• &S12,COR,4,BC<cr> routes Unit 4 Component Input B to Component Output C.
• &S12,COR,2,DA<cr> Routes Unit 2 Component Input D to Component Output A.
VID1 (Video 1)
Description: Switches S128P's Panel 1 in Zone zz to a specific Video ab.
Command:
&S12,VID1,zzab<cr>
Query:
&S12,VID1,zz?<cr>
Reply:
&S12,VID1,zzab<cr>
Page 102 © ELAN Home Systems 2009 • All rights reserved.
S128P.indd 102 1/15/2009 1:07:44 PM