Elan S128P Installation Manual page 59

E L A N H O M E S Y S T E M S
Default Tracking Mode
For many systems, one-to-one audio/composite video switching may be all that is required. Default Tracking Mode
is the default audio/video switching mode for the S128P, and requires no additional programming. By default, the
first twelve video inputs of the S128P are directly tied to, or 'track' with, the twelve audio inputs. This means that
the audio and composite video signals of Sources 1-12 will switch simultaneously when selected from a zone with-
out any additional programming. Additionally, in Default Tracking Mode, Video Inputs 13-16 remain available for
additional Composite video sources such as CCTV cameras. These inputs can be programmed for selection in any
zone.
In Default Tracking Mode, there are two pre-configured video outputs for each zone. The first output is pre-config-
ured for a VIA! Touch Panel, the second output for a TV/monitor. When a video source is selected in a zone, both
of these video outputs will automatically route the selected source video to that zone ( see Video Zone Output
Connections for further details).
Default Tracking Mode
Composite Video Inputs 1-12 'track' on a 1-to-1 basis with Audio Inputs 1-12.
Composite Video Inputs 13-16 are available as independent inputs, i.e. for CCTV cameras.
Each Zone has 2 pre-configured video outputs, one for a VIA!, one for a TV/monitor.
A/V A/V
Input Input
1 2
Composite
Video Inputs
13-15
© ELAN Home Systems 2009 • All rights reserved.
S128P.indd 57
A/V A/V A/V
Input Input Input
3 4 5
Zone 1
VIA! TV
Composite
Video Input
16
Figure 3-47: Default Tracking Mode
A/V A/V A/V
Input Input Input
6 7 8
Zone 2 Zone 3 Zone 4
/ VIA! TV / VIA! TV / VIA! TV /
S128P
INSTALLATION MANUAL
A/V A/V A/V
Input Input Input
9 10 11
Zone 5 Zone 6 Zone 7
VIA! TV / VIA! TV / VIA! TV /
A/V
Input
12
Zone 8
VIA! TV /
Page 57
1/15/2009 1:07:27 PM