Local Source Connections; External Ir Connections - Elan S128P Installation Manual

S128P
INSTALLATION MANUAL

Local Source Connections

Connect local audio sources to the LSWP Local Source Wall Plate using the stereo interconnect cables provided.
Use Cat-5 from the LSWP to the S128P, and connect as shown below. Only one local source per zone can be con-
nected.
Local Source Input Connections w/ LSWP
S128P
To S128P Local
Source Inputs

External IR Connections

It is necessary to provide +12VDC for any External IR device when not using a PS128P Precision Panel. Connect
only the IR and GND leads from an IR receiver, keypad, or other IR device to the EXT IR IN port on the S128P. See
VIA!TOOLS or ELANTOOLS Help for information about External IR programming.
External IR Receiver to S128P External IR Input
IR Receiver
Page 46
S128P.indd 46
Blue
White/Blue
Orange
White/Orange
Cat-5
Green
White/Green
Brown
White/Brown
Figure 3-30: Local Source Input Connections
+12
VDC
+12VDC
GND-Sleeve
IR-Tip
Figure 3-31: EXT. IR IN Connection
E L A N H O M E S Y S T E M S
LSWP
S128P Local Source
Wall Plate
White/Green
Green
Brown
White/Brown
Orange
White/Orange
Blue
White/Blue
(included w/ LSWP)
S128P
© ELAN Home Systems 2009 • All rights reserved.
1 M Stereo
Interconnect Cable
(included w/ LSWP Kit)
Local Audio Source
Front
Back
IR
Audio Out
L R Window
IR Emitter
1/15/2009 1:07:17 PM