B" Punchdown Locations-12V - Elan S128P Installation Manual

E L A N H O M E S Y S T E M S

"B" Punchdown Locations-12V

The SPP Precision panel has the ability to connect touchpanels, keypads and Olé Touchpads in various
combinations in each zone. The "B" punchdown location can either pass 12VDC power from the S128P Controller
(Internal Power) or 16VDC from a power supply connected to the front of the SPP (External). Figure 3-7 shows
connectivity to the "B" location and utilizing internal 12VDC power from the S128P Multi-Room Controller.
NOTE: Place the "INT 12V/EXT 16V" switch in the UP ("INT 12V")
position for this application.
Olé Touchpad to SPP Precision Panel (Using 12VDC from S128P)
© ELAN Home Systems 2009 • All rights reserved.
S128P.indd 31
Figure 3-7: Olé Touchpad "B" Internal 12VDC Connections
ELAN Precision Panels save
VIA!NET EXT IR TO SENSE INPUTS SS/SC4
1 2 3
USE STEREO 3.5mm PLUGS ONLY
4 5 6
ZONE ZONE
1 5
time and make sense out
TRIGGERS
1 2 3 4
ZONE ZONE
2 6
5 6 7 8
POWER
ZONE ZONE
3 + - - 7
of complex wiring jobs!
ZONE ZONE
16VDC / 10A
4 8
16VDC / 4A
16VDC/1.5A
S128P
IMPORTANT NOTE
Olé Touchpads
Use the correct power
supply connected to the front
of the SPP for the number
or Olé Touchpads and VIA!
Touch Panels in the system.
INSTALLATION MANUAL
Page 31
1/15/2009 1:07:03 PM