Component Video Switching - Elan System12 Installation Manual And User's Manual

E L A N H O M E S Y S T E M S
Video Switching
(continued)

Component Video Switching

Component (Y, P , P ) video signals can easily be
B R
switched by the S12. Each Component video source
utilizes three video inputs; one for Y, one for P
one for P (Green, Blue, and Red). These inputs are
R
grouped together through programming to switch as
one entity.
Component inputs are designated on the rear panel of
the S12 in reverse order.
Component Video Source Connections
5th Component video source
to Component video input 'E'
(inputs 1, 2, 3)
COMPONENT VIDEO OUTPUTS
P
Y P
B
S12
P P
Y
B
COMPONENT VIDEO OUTPUTS
1st Component video source
to Component video input 'A'
(inputs 13, 14, 15)
© ELAN Home Systems 2004 • All rights reserved.
B
4th Component video source
to Component video input 'D'
(inputs 4, 5, 6)
COMPONENT VIDEO OUTPUTS
P
Y
B
R
R
These groups are labeled:
• A: Inputs 13, 14, 15
• B: Inputs 10, 11, 12
, and
• C: Inputs 7, 8, 9
• D: Inputs 5, 5, 6
• E: Inputs 1, 2, 3
Use high quality Component video cables to connect
Component sources to the S12 as shown below.
Make sure to connect the proper Component cable to
the proper video input jack (Y, P
3rd Component video source
to Component video input 'C'
(inputs 7, 8, 9)
COMPONENT VIDEO OUTPUTS
P
P Y
B
R
SYSTEM12
INSTALLATION MANUAL
, P ).
B R
2nd Component video source
to Component video input 'B'
(inputs 10, 11, 12)
COMPONENT VIDEO OUTPUTS
P
P Y
B
R
P
R
Page 49