Introduction; Target Groups; Additional Technical Documentation - Peri SKYDECK Instructions For Assembly And Use

Introduction

Target groups

Contractors
These Instructions for Assembly and
Use are designed for contractors who
use the formwork systems for
assembling, modifying and disman-
ƒ
tling, or
use them, e.g. for concreting, or
ƒ
for other operations, e.g. carpentry or
ƒ
electrical work.
Construction site coordinator
The Safety and Health Protection Coor-
dinator*
is appointed by the client,
ƒ
must identify potential hazards during
ƒ
the planning phase,
determines measures that provide
ƒ
protection against risks,
creates a safety and health plan,
ƒ
coordinates the protective measures
ƒ
for the contractor and site personnel
so that they do not endanger each
other,
monitors compliance with the protec-
ƒ
tive measures.
* Valid in Germany: Regulations for Occupa-
tional Health and Safety on Construction
Sites 30 (RAB 30)-

Additional technical documentation

Poster: SKYDECK
ƒ
MULTIPROP Slab Props: Instructions for Assembly and Use
ƒ
PEP Ergo Slab Props: Instructions for Assmbly and Use
ƒ
Instructions for Use:
ƒ
– Pallet Lifting Truck
– Pallets and Stacking Devices
– Stripping Cart ASW 465
– Stripping Cart Alu
– Transportation Fork SKYDECK SUG
Technical Data Sheet for Anchor Bolt PERI 14/20 x 130
ƒ
PERI Design Tables – Formwork and Shoring
ƒ
Brochures:
ƒ
– SKYDECK
– SKYDECK Beam Waler SD
SKYDECK Panel Slab Formwork
Instructions for Assembly and Use – Standard Configuration
Competent persons
Due to the specialist knowledge gained
from professional training, work experi-
ence and recent professional activity,
the competent person has a reliable un-
derstanding of safety-related issues and
can correctly carry out inspections. De-
pending on the complexity of the test to
be undertaken, e.g. scope of testing,
type of testing or the use of a certain
measuring device, a range of specialist
knowledge is necessary.
Qualified persons
Formwork systems may only be assem-
bled, modified or dismantled by person-
nel who are suitably qualified to do so.
For the work to be carried out, the quali-
fied persons must have received in-
structions** which contain at least the
following points:
Explanation of the plan for the assem-
ƒ
bly, modification or dismantling of the
formwork in an understandable form
and language.
Description of the measures for as-
ƒ
sembling, modifying or dismantling
the formwork.
Designation of the preventive meas-
ƒ
ures to avoid the risk of persons and
objects falling.
** Instructions are given by the contractor him-
self or a competent person selected by him.
Designation of the safety precautions
ƒ
in the event of changing weather con-
ditions which could adversely affect
the safety of the formwork system as
well as the personnel concerned.
Details regarding the permissible
ƒ
loads.
Description of any other risks that are
ƒ
associated with the assembly, modifi-
cation or dismantling procedures.
In other countries, ensure that the
relevant national guidelines and reg-
ulations in the respective current
version are complied with!
3