View Installed Controllers' Firmware; View Current Control Protocol; Set Current Control Protocol - Lightware MX32x32HDMI-Pro User Manual

Legend (MX32x32 Frame): The router has 4 input and 4 output cards (32x32)
installed. All cards are DVI-HDCP.
Legend (MX16x16 Frame): The router has 2 input and 2 output cards (16x16)
installed.
Legend (MX8x8 Frame):
installed.

4.2.6. View installed controllers' firmware

Description: Shows the firmware revisions
of the installed programmed controllers
Example:

4.2.7. View current control protocol

Description: Shows the RS-232, TCP/IP
control protocol.

4.2.8. Set current control protocol

Description: Sets the current RS-232,
TCP/IP control protocol (Default is '1')
Page 48 / 109
The router has 1 input and 1 output cards (8x8)
→
←
MX32x32 {FC}
→
← (CF MX-CP FW:1.0.2 @ 0X10)CrLf
(CF MX-CP FW:1.0.2 @ 0X12)CrLf
←
(CF MX-DVI-EDID FW:1.1.0 @ 0X20)CrLf
←
MX16x16 {FC}
→
(CF MX-CP FW:1.0.2 @ 0X10)CrLf
←
(CF MX-DVI-EDID FW:1.1.0 @ 0X20)CrLf
←
MX8x8 {FC}
→
(CF MX-CP FW:1.0.2 @ 0X10)CrLf
←
(CF MX-DVI-EDID FW:1.1.0 @ 0X20)CrLf
←
{P_?}
→
(CURRENT PROTOCOL = #1)CrLf
←
{P_x}
→
(PROTOCOL #<x> SELECTED!)CrLf
←
{FC}
(CF CARD_FIRMWARE)CrLf