View Installed I/O Cards" Hardware; View Installed Controllers" Firmware; View Current Control Protocol; Set Current Control Protocol - Lightware MX6x6DVI User Manual

7.4.4. View Installed i/o cards' hardware
Description: Shows the hardware name and revision of the installed cards.
Info This router model is a compact type, so there are no separate input / output cards.
Command {is}
Response (<SL# 0 MB_DESCRIPTOR>
Explanation 1 (MX6x6DVI router): The router has only one card, with 6 inputs
and 6 outputs. All cards are single link DVI-D.
Command {is}
Response (<SL# 0 MB_DESCRIPTOR>
Explanation 2 (MX8x8DVI-DL router): The router has only one card, with 8
inputs and 8 outputs. The router is dual link capable.
7.4.5. View installed controllers' firmware
Description: Shows the firmware revisions of the installed controllers.
Command {fc}
Response (<CARD_FIRMWARE>)CrLf ←

7.4.6. View current control protocol

Description: Shows the RS-232, TCP/IP control protocol.
Command {p_?}
Response CURRENT●PROTOCOL●
Legend: <x> stands for the active protocol.
Explanation: Protocol 1 is active here.

7.4.7. Set current control protocol

Description: Sets the current RS-232, TCP/IP control protocol (Default is ‟1‟).
Command {p_x}
Response (PROTOCOL●#<x>●
Legend: <x> stands for the selected protocol.
Explanation: Protocol 1 is activated.
Format
)CrLf
Format
)CrLf
Format
Format
=●#<x>)CrLf
Format
SELECTED!)CrLf
User's Manual Rev. 1.0
Example 1
→ {is}
← (SL# 0 MX-6x6-DVI SCH_1.1
PCB_1.1)CrLf
Example 2
→ {is}
← (SL# 0 MX-8x8-DVI-DL SCH_1.1
PCB_1.1)CrLf
Example
→ {fc}
(CF MX-CP FW:1.0.4 @ 0x10)CrLf
←
(CF MX8x8EDID v1.9.1 @ 0x50)CrLf
Example
→ {p_?}
← (CURRENT PROTOCOL = #1)CrLf
Example
→ {p_1}
← (PROTOCOL #1 SELECTED!)CrLf
MX8x8DVI-DL
Page 57 / 75